Advertisement
Installation Instructions
WATER VALVE ASSEMBLY INSTALLATION INSTRUCTIONS
[]
Are these
the right instructions
for your model?
Follow
the Installation
Instructions
indicated
by
the label
on the back of the refrigerator--
[]
[] []
[]
[] []
[]
[] []
[]
[]
[] or []
BEFORE YOU BEGIN
Read each step thoroughly
before proceeding.
• CAUTION - Unplug the
Refrigerator.
To eliminate
the danger
_?
13"
of electric
shock during
installation,
_
I_
you must unplug
the refrigerator
from
_
its electrical
outlet.
,\
TOOLS YOU WILL NEED
FlatbladeandPhillips
Pliers
screwdrivers
Sharpknife
1/4" and5/16" Nutdrivers
I_REMOVE
THE COVER
Use a 5/16"
nutdriver
or an adjustable
wrench
to
remove
the compressor
compartment
access cover.
This requires
removing
six screws which
attach
the
cover to the back of the refrigerator
case.
Be sure to save the screws as the access cover must
be reinstalled
later to ensure your refrigerator
will
function
properly.
[] ATTACH THE WATER VALVE
• Locate the female connector
plug. Plug the
female connector (C) onto the male terminals
on the water valve (4). Either wire can go on
either terminal.
• Fasten
the water valve to the cabinet
by driving
the hex-head
screw (13) from the kit into the hole
in the cabinet
leg,
40
Advertisement
