Advertisement
Installation Instructions
WATER VALVE ASSEMBLY INSTALLATION INSTRUCTIONS
[]
Are these
the right
instructions
for your
model?
Follow
the InstaUation
Instructions
indicated
by
the label on the back of the refrigerator--
[] [] [] [] [] [] [] [] [] [] [] [] or []
BEFORE YOU BEGIN
Read each step thoroughly
before
proceeding.
" CdlkUTION-
Unplug the
_
Refrigerator. To eliminate the danger
of electric shock during installation,
you must unplug the refrigerator
from
its electrical outlet.
TOOLS YOU WILL NEED
FlatbladeandPhillips
Pliers
screwdrivers
Sharp knife
1/4" and5/16"Nutdrivers
[] REMOVE
THE COVER
At the
bottom
rear
of the
refrigerator,
remove
the
screw(s)
holding
the
access
cover.
Bend
the
cover
back
for access
to the compartment.
Be sure
to save the
screws
as the
access
cover
must
be reinstalled
later
to ensure
your
refrigerator
will
function
properly.
•
"lhl /
[] ATFACH THE WATER VALVE
• Locate the female
connector
plug (C) which
is
attached
to the cabinet
by a metal or plastic clip.
Remove
the clip by removing
the screw.
Metal or
plaslicclip
• Plug the female connector (C) onto the male
terminals on the water valve (4). Either wire
can go on either terminal.
• Fasten the water valve to the cabinet by driving the
hex-head
screw (13) from
the kit into the hole
in the cabinet
leg.
36
Advertisement
