Advertisement
Installation Instructions
[] POWER CORD ADAPTER
There are two power cord adapters
included
with the
kit; be sure to use the one specified
in the Parts List
on page 7. Plug the female end of the power curd
adapter
(19) onto the male terminals
on the icemaker
power cord. When connecting
the adapter
to the
power cord, make sure the seal is in place between
the connectors.
Seolre
the power cord adapter
to
the icemaker
by putting it into the hook at the back
of the icemaker
and attaching
it to the icemaker
with awire tie (22).
[] INSTALL THE ICEMAKER FILL CUP
Install the icemaker fill cup (side-mounted)
(18)
into the icemaker
as shown.
[]PLUG
IN THE ICEMAKER
Hold the icemaker
in the freezer
compartment
as
shown.
Insert the ieemaker
power
cord plug (D)
into the socket,
making
sure the prongs
and holes
are matched.
Press the plug firmly into the socket.
I
[] MOUNT ICEMAKER
• Lift the icemaker
so the fill tube extension
(10)
fits in the fill cup opening
(C). Hang
the
icemaker
on the two mounting
screws (A).
Make
$11re:
• The power cord is still firmly in the socket.
• The fill tube extension
(10) is still in the fill cup
opening.
(Check
the rear of the refrigerator
to
make sure the fill tube has not been pushed
out
of the back of the refrigerator.)
• The icemaker
moundng
screws are located
in
the uppermost
position
of the mounting
slots.
THEN TIGHTEN
THE ICEMAKER
MOUNTING
SCREWS SECURELY.
[]
INSTALL THE ICE BUCKET
Put the ice bucket (11)
directly under
the
icemaker
(to the left and
all the way to the rear of
the shelf under
the
icemaker).
Make sure the icemaker
power switch is set to
0 (off).
[_ ATTACH WARRANTY LABEL
A label (9) is provided with this kit to record
the
date of installation
for warranty
purposes.
Apply it
to the back of the refrigerator.
[]
KEEP THIS MANUAL
The warranty for the icemaker is printed in this
manual. Keep this manual with your Refrigerator
Owner's Manual.
The icemaker
installation
inside the freezer is now
complete.
Continue
to the Water Valve Assembly
section.
19
Advertisement
