Download Print this page

GE GBS2OKB Owner's Manual And Installation Instructions page 4

Icemaker accessory kit

Advertisement

Installation Instructions
[] INSTALL THE MOUNTING SCREWS
• Skip to Step 5 if screws are already in place in
the freezer
side wall.
• Install two self-tapping Phillips
head screws (9) from the kit
in the holes in the side wall.
The screw heads should extend
about 1/2" (13 ram) from the
side wall.
[] INSTALL THE ICEMAKER FILL CUP
Install the icemaker f'dl cup (side-mounted)
(11)
into the icemaker
as shown.
[] MOUNT THE ICEMAKER
• Lift the icemaker
so the t'fll tube shipped
with the
refrigerator
fits in the fill cup opening
(E). Hang
the ieemaker
on the two mounting
screws (9) in
the side wall.
Make sure:
• The power cord is still firmly in the socket.
• The f'dl tube extends
into the fill cup opening
on
the back of the icemaker.
(Check
the rear of the
refrigerator
to make sure the fill tube has not
been pushed
out of the back of the refrigerator),
• The icemaker
mounting
screws are located
in
the uppermost
position
of the mounting
slots.
• The icemaker
is level.
• The icemaker
power switch is set to O (off).
THEN
SECURELY TIGHTEN
THE ICEMAKER
MOUNTING
SCREWS.
[]PLUG
IN THE ICEMAKER
Holding
the icemaker
in place, insert the ieemaker
power cord plug into the socket on the rear wall,
making sure the prongs
and holes are matched.
Press the plug firmly into the socket. Lock the plug
in place by clipping
the restraints
onto each side of
the plug. Make sure the restraints
click into place.
Make sure the power cord is still in the hook on
the back of the icemaker.
Hook_
[] RE-INSTALL THE SHELF SUPPORT,
BUCKET, SHELF AND BASKET
Replace
the center vertical shelf support,
ice bucket,
chiller shelf and storage basket by reversing the steps
in Step 1.
[] ATTACH WARRANTY LABEL
A label (7) is provided
with this kit to record
the
date of installation
for warranty
purposes.
Apply it
to the hack of the refrigerator.
1-_KEEP THIS ADDENDUM
Keep this addendum
with your Refrigerator
Owner's Manual and Installation
Instructions.
The icemaker
installation
inside the freezer
is now
complete.
Continue
to the Water Valve Assembly
section.
4

Advertisement

loading