Table of Contents
Advertisement
340i Integrated Amplifier
Unpacking
The Nēo 340i Integrated Amplifier is heavy component and should be removed from its box with care. We strongly advise
that you seek another person to help lift the amplifier out of its box, and place it in its final location.
The following accessories should be included inside the box with your amplifier:
AC power cable
'CRM-2' remote control with two 'AA' batteries
This owner's manual
Warranty and product registration information
Once the Nēo 340i is unpacked, inspect it thoroughly and report any damage to your dealer immediately. We suggest that
you keep all of the original packaging, storing it in a safe, dry place in case you're required to transport this product. The
customized packaging is specially designed to protect the 340i from any potential damage during transit.
Please write the serial number of your new Simaudio Nēo 340i in the space provided below for future reference.
Installation & Placement
The Nēo 340i Integrated Amplifier is both powerful and heavy. It requires reasonable ventilation to maintain an optimum and
consistent operating temperature, especially since it will radiate heat when driven hard. Consequently, it should be placed in a
location with empty space around it for proper heat dissipation. You should never place another component on top of this
integrated amplifier. As well, it should be placed on a solid level surface. You should avoid placing it near a heat source or
inside a closed cabinet that is not well ventilated as this could compromise the amplifier's performance and reliability. The
340i uses a large toroidal transformer in its power supply; even though it is well shielded, you should not place this
integrated amplifier too close to source components sensitive to EMI, such as turntables, phono preamplifiers and CD Players.
ou should never place another component directly on top of this integrated amplifier.
Finally, y
If you intend to use the Nēo 340i's USB input connection with a Windows-based computer, you will need to
install our USB HD driver, which can be downloaded from our website:
Note: Apple-based computers don't require this driver.
____________________________________________________________________________________
Serial No.: ________________
http://www.simaudio.com/downloads.htm
(USA and Canada only)
6
Advertisement
Table of Contents
