Table of Contents
Advertisement
430HA Headphone Amplifier
Unpacking
The Nēo 430HA Headphone Amplifier should be removed from its box with care.
The following accessories should be included inside the box with your amplifier:
AC power cable
'CRM-2' remote control with two 'AA' batteries
'SimLink' cable with 1/8" mini plug terminations on each end
This owner's manual
Warranty and product registration information
Once the Nēo 430HA is unpacked, inspect it
thoroughly and report any damage to your dealer
immediately. We suggest that you keep all of the
original packaging, storing it in a safe, dry place in
Please write the serial number of your new Nēo 430HA in the space provided below for future reference.
Installation & Placement
The Nēo 430HA requires only minimal ventilation
to maintain an optimum and consistent operating
temperature. However, you should avoid placing it
near a heat source as this could compromise the
headphone amplifier's performance and reliability.
As well, it should be placed on a solid level surface.
The 430HA uses toroidal transformers; even though
they are well shielded, you should not place the
preamplifier
too
close
sensitive to EMI, such as a turntables.
____________________________________________________________________________________
Serial No.: ________________
to
source
components
(USA and Canada only)
case you're required to transport this product. The
customized packaging is specially designed to
protect the 430HA from any potential damage
during transit.
If your Nēo 430HA is equipped with the DAC
option and you intend to use the USB input
connection (PCM or DSD) with a Windows-
based computer, you will need to install our
USB HD DSD driver, which can be downloaded
from the support section of our website.
Note: Apple-based computers don't require
this driver.
7
Advertisement
Table of Contents
