Table of Contents
Advertisement
Owner's Manual
Unpacking
The MOON 850P preamplifier and power supply/controller should be removed from its crate with care.
The following accessories should be included inside the box with your preamplifier:
AC power cable
FRM-3 remote control with three 'AAA' batteries
Three (3) color-coded cables to connect the preamplifier to it's power supply/controller chassis
SimLink™ cable with 1/8" mini plug terminations on each end
This owner's manual
Warranty and product registration information
Once the 850P is unpacked, inspect it thoroughly and report any damage to your dealer immediately. We suggest
that you keep all of the original packaging, storing it in a safe, dry place in case you're required to transport this
product. The customized packaging is specially designed to protect the 850P from any potential damage during
transit.
Please write the serial number of your new MOON 850P in the space provided below for future reference.
Installation
The MOON 850P dual-mono preamplifier is very heavy
and should be placed on a solid, level surface. You
should avoid placing it near a heat source or inside a
closed cabinet that is not well ventilated as this could
compromise the preamplifier's performance and
reliability.
If the surface you have chosen isn't perfectly level, each
of the four (4) legs of both your 850P and it's power
supply / controller are height adjustable; carefully using
your fingers, you can either raise each leg by turning the
Serial Number
(USA and Canada only)
cone underneath clockwise, or lower each leg by
turning it counterclockwise.
We strongly recommend that you leave these cones
mounted to the component at all times for reasons
related to both performance and aesthetics.
7
Advertisement
Table of Contents
