Table of Contents
Advertisement
Owner's Manual
Unpacking
The MOON 810LP should be removed from its box with care.
The following accessories should be included inside the box with your phono preamplifier:
AC power cable
One (1) pen shaped plastic hand tool for making DIP-switch adjustments
This owner's manual
Warranty and product registration information
Once the 810LP is unpacked, inspect it thoroughly and report any damage to your dealer immediately. We
suggest that you keep all of the original packaging, storing it in a safe, dry place in case you're required to
transport this product. The customized packaging is specially designed to protect the 810LP from any potential
damage during transit.
Please write the serial number of your new MOON 810LP in the space provided below for future reference.
Installation
The 810LP is more sensitive than most other types of
audio
components
interference) from power supplies and motors.
Consequently, it should be placed at a minimum
distance of 18 inches from power supplies, turntables,
tape decks, AC line filters, etc. You should never place
another component directly on top of this phono
preamplifier. It should be placed on a solid, level surface.
You should avoid placing it near a heat source or inside
a closed cabinet that is not well ventilated as this could
compromise the preamplifier's performance and
reliability.
Serial Number
to
EMI
(electro-magnetic
(USA and Canada only)
If the surface you have chosen isn't perfectly level, each
of the four (4) cones of your 810LP are height
adjustable; carefully using your fingers, you can either
raise each leg by turning the cone underneath
clockwise,
or
lower
counterclockwise.
We strongly recommend that you leave these cones
mounted to the component at all times for reasons
related to both performance and aesthetics.
each
leg
by
turning
it
7
Advertisement
Table of Contents
