Unpacking; Installation & Placement - moon 350P Owner's Manual

Owner's Manual

Unpacking

The Nēo 350P preamplifier should be removed from its box with care.
The following accessories should be included inside the box with your preamplifier:
AC power cable
'CRM-2' remote control with two 'AA' batteries
'SimLink™' cable with 1/8" mini plug terminations on each end
This owner's manual
Warranty and product registration information (USA and Canada only)
Once the Nēo 350P is unpacked, inspect it thoroughly and report any damage to your dealer immediately. We
suggest that you keep all of the original packaging, storing it in a safe, dry place in case you're required to
transport this product. The customized packaging is specially designed to protect the 350P from any potential
damage during transit.
Please write the serial number of your new Nēo 350P in the space provided below for future reference.
Installation & Placement
The Nēo 350P requires only minimal ventilation to
maintain an optimum and consistent operating
temperature. However, you should avoid placing it near
a heat source as this could compromise the
preamplifier's performance and reliability. As well, it
should be placed on a solid level surface. The 350P uses
toroidal transformers; even though they are well
shielded, you should not place the preamplifier too
close to source components sensitive to EMI, such as a
turntables.
Serial Number
If you intend to use the Nēo 350P's USB input
connection (PCM or DSD) with a Windows-based
computer, you will need to install our USB HD DSD
driver, which can be downloaded from the support
section of our website.
Note: Apple-based computers don't require this
driver.
7