Unpacking; Installation & Placement - moon ACE NEO SERIES Owner's Manual

Owner's Manual

Unpacking

The Nēo ACE should be removed from its box with care.
The following accessories should be included inside the box with your All-in-One:
AC power cable
'CRM-3' remote control with two 'CR-2032' batteries
'SimLink™' cable
Wi-Fi antenna
1 spare fast-blow fuse
This owner's manual
Quick reference guide
Warranty and product registration information (USA and Canada only)
Once the Nēo ACE is unpacked, inspect it thoroughly and report any damage to your dealer immediately. We
suggest that you keep all of the original packaging, storing it in a safe, dry place in case you're required to
transport this product. The customized packaging is specially designed to protect the ACE from any potential
damage during transit.
Please write the serial number of your new Nēo ACE in the space provided below for future reference.
Installation & Placement
The Nēo ACE requires rreasonable ventilation to
maintain an optimum and consistent operating
temperaturesince it will radiate heat. Consequently, it
should be placed in a location with empty space around
it for proper heat dissipation. You should never place
another component on top of this All-in-One. As well, it
should be placed on a solid level surface. You should
avoid placing it near a heat source or inside a closed
cabinet that is not well ventilated as this could
compromise its performance and reliability. The ACE
uses a toroidal transformer; even though it is well
shielded, you should not place it too close to source
components sensitive to EMI, such as turntables.
Your Nēo ACE is equipped with the "MiND" Music
Streamer. If you plan to use its wireless streaming
feature (between your wireless router and your ACE),
you must install the included Wi-Fi antenna on the back
panel by screwing it into the socket labelled "WIFI ANT".
Serial Number
Since your Nēo ACE is equipped with the
"MiND" Music Streamer, please visit our
website to download a PDF version of the
"MiND App User Guide"
If you intend to use the Nēo ACE's USB input
connection (PCM or DSD) with a Windows-
based computer, you will need to install our
USB HD DSD driver, which can be downloaded
from the support section of our website.
Note: Apple-based computers don't require this
driver.
7