Unpacking; Installation & Placement - moon 340i Neo Series Owner's Manual

Hide thumbs Also See for 340i Neo Series:
Table of Contents

Advertisement

Owner's Manual

Unpacking

The Nēo 340i integrated amplifier should be removed from its box with care.
The following accessories should be included inside the box with your integrated amplifier:
AC power cable
'CRM-2' remote control with two 'AA' batteries
'SimLink™' cable with 1/8" mini plug terminations on each end
This owner's manual
Warranty and product registration information (USA and Canada only)
Once the Nēo 340i is unpacked, inspect it thoroughly and report any damage to your dealer immediately. We
suggest that you keep all of the original packaging, storing it in a safe, dry place in case you're required to
transport this product. The customized packaging is specially designed to protect the 340i from any potential
damage during transit.
Please write the serial number of your new Nēo 340i in the space provided below for future reference.
Installation & Placement
The Nēo 340i Integrated Amplifier is both powerful and
heavy. It requires reasonable ventilation to maintain an
optimum and consistent operating temperature,
especially since it will radiate heat when driven hard.
Consequently, it should be placed in a location with
empty space around it for proper heat dissipation. You
should never place another component on top of this
integrated amplifier. As well, it should be placed on a
solid level surface. You should avoid placing it near a
heat source or inside a closed cabinet that is not well
ventilated as this could compromise the amplifier's
performance and reliability. The 340i uses a large
toroidal transformer in its power supply; even though it
is well shielded, you should not place this integrated
amplifier too close to source components sensitive to
EMI, such as turntables, phono preamplifiers and CD
Serial Number
Players. Finally, you should never place another
component directly on top of this integrated amplifier.
If you intend to use the Nēo 340i's USB input
connection (PCM or DSD) with a Windows-based
computer, you will need to install our USB HD DSD
driver, which can be downloaded from the support
section of our website.
Note:
Apple-based computers don't require this
driver.
7

Advertisement

Table of Contents
loading

Table of Contents