MOON 340i Integrated Amplifier Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block ventilation openings. Install in accordance with the manufacturer’s instructions.
Page 3
To prevent shock hazard, all three connections must ALWAYS be used. Connect the MOON 340i only to an AC source of the proper voltage; Both the shipping box and rear panel serial number label will indicate the correct voltage. Use of any other voltage will likely damage the unit and void the warranty AC extension cords are NOT recommended for use with this product.
Before setting up your new MOON 340i, we encourage you to please read this manual thoroughly to properly acquaint yourself with its features. We hope you enjoy listening to the MOON 340i integrated amplifier as much as the pride we have taken in creating this fine audio product.
MOON 340i Integrated Amplifier Introduction Your MOON 340i integrated amplifier incorporates many significant design features to achieve its “world class” level of performance. This is an abbreviated list of the more important features: An oversized power supply using a custom toroidal transformer design Rated output of 100 watts/channel into 8 ohms and 200 watts/channel into 4 ohms Five line-level inputs including one front-mounted 1/8”...
The “Spk off” button fully disengages the output signal only to the loudspeakers connected to the MOON 340i. This feature is very useful when listening to the 340i with headphones. When this function is engaged the red LED located to the left of the display window will illuminate.
The “Phones” jack is used for connecting a pair of stereo headphones to the MOON 340i. The input connector is a standard ¼” stereo TRS jack. When a pair of headphones are used with the 340i, the loudspeakers will still receive an output signal.
MOON 340i Integrated Amplifier Optional Phono Section The MOON 340i Integrated Amplifier features an optional phono section that may be installed only at an authorized dealer or at the Simaudio factory. Circuit Board Layout: Figure 3: MOON 340i Optional Phono Section Circuit Board Layout...
2 banks of jumpers – one each for the left and right channels. This is the result of the phono section’s genuine mirror-image circuit design which yields exceptional stereo separation. Always disconnect all audio connections and the AC power cord of your MOON 340i Preamplifier prior to changing any of the following input settings.
For example, when one conductor is carrying a signal of +10 Volts, the other will be carrying a signal of –10 Volts. When these two inverted signals on a balanced line are output from the MOON 340i, any noise picked up by the interconnect will be eliminated since a differential circuit amplifies only the difference between these two signals: Noise on a balanced interconnect will be equal on both conductors and therefore not be processed.
DB9 connector. The MOON 340i is equipped with a pair of gold-plated binding posts. The right channel speaker output is located above the analog inputs. The left channel speaker output is located to the right of the digital inputs. Connect your loudspeakers, with the cables of your choice, to these binding posts, paying attention to respect the polarity (“+”...
Ensure that the AC wall outlet you use has a functioning ground. For the best sonic performance, it is preferable that you plug your MOON 340i directly into a dedicated AC outlet and avoid using an extension cord.
MOON 340i Integrated Amplifier Specifications Configuration ............Stereo Power Supply Transformer ........400VA Power Supply Capacitance ........40,000µF Class Of Operation - Amplifier ........Class A/B Single-ended inputs ..........4 (RCA) Mini-jack input ............1 (1/8”) Optional Balanced inputs ......... 1 (XLR) Input Sensitivity .............
Page 16
Jack......... 3.5mm microphone jack Input Impedance....1kΩ Current Consumption..12mA NOTE: In the event that you require the RS-232 codes for your MOON 340i, please contact Simaudio Ltd. directly by either email (service@simaudio.com) or by toll-free telephone (877-980-2400). Fuse Replacement: For the 120V version use a 5A fast blow (3AG size).