Table of Contents
Advertisement
Owner's Manual
Unpacking
The Nēo 230HAD headphone amplifier should be removed from its box with care.
The following accessories should be included inside the box with your headphone amplifier:
AC power cable
'CRM-2' remote control with two 'AA' batteries
This owner's manual
Warranty and product registration information (USA and Canada only)
Once the Nēo 230HAD is unpacked, inspect it thoroughly and report any damage to your dealer immediately. We
suggest that you keep all of the original packaging, storing it in a safe, dry place in case you're required to
transport this product. The customized packaging is specially designed to protect the 230HAD from any potential
damage during transit.
Please write the serial number of your new Nēo 230HAD in the space provided below for future reference.
Installation & Placement
The Nēo 230HAD requires only minimal ventilation to
maintain an optimum and consistent operating
temperature. However, you should avoid placing it near
a heat source as this could compromise the headphone
amplifier's performance and reliability. As well, it should
be placed on a solid level surface. The 230HAD uses
toroidal transformers; even though they are well
shielded, you should not place the preamplifier too
close to source components sensitive to EMI, such as a
turntables.
Serial Number
If you intend to use the USB input connection (PCM or
DSD) with a Windows-based computer, you will need
to install our USB HD DSD driver, which can be
downloaded from the support section of our website.
Note: Apple-based computers don't require this driver.
7
Advertisement
Table of Contents
