Taper Satin Stitch - Husqvarna Viking Designer I Usb User Manual

Taper Satin Stitch

The taper stitch on Menu F, Applique Stitches,
stitch F6 automatically tapers the satin stitch for
corners and points and can be used for satin
stitch lettering. On the same piece of stabilized
fabric, stitch a diamond of tapered satin stitch.
Touch: Menu F, Applique Stitches, Touch Stitch
F6.
Snap on: Presser foot B as recommended
Sew:
The stitch will automatically taper from a point
to the 1/4" (6 mm) satin stitch width.
Note: The red line on the left side of the stitch
indicates what part of the sewing sequence
USB
Designer I
is sewing at the moment.
• Stitch about 1/2" (13 mm). Touch
tin stitch will taper to a point and tie off auto-
matically.
• For a narrower satin stitch, adjust the stitch
width .
• To begin with a fl at end satin stitch, touch
stitch F6, touch reverse before beginning
to sew. To make the tapered points longer,
Touch , Elongation
• When you have the result you wish, touch
. The stitch will now repeat in succession and
the machine will stop automatically when the
stitch is completed.
• Touch .
• Touch to repeat.
86
Decorative/Crafting
. The sa-
.