Seam And Overcast - Husqvarna Viking Designer I Usb User Manual

Utility/Garment Sewing

Seam and Overcast

The Seam/Overcast stitch sews the seam and
overcasts the edge all at one time. This saves
time. There are a number of different Seam/
USB
Overcast stitches on your Designer I . Your
Sewing Advisor will select the best one for your
fabric and make all adjustments automatically.
Fabric: Stretch light, cut in two
Touch: Stretch light on the Sewing Advisor fa-
bric screen. Seam/Overcast on the technique
screen (A).
Snap on: Presser foot J as recommended.
Use: Size 75 stretch needle as recommended.
Pla ce fabric pieces right sides together. Put the
fabric in position under the presser foot with the
A B
pin on the foot along the edge of the fabric. If
C
you need to adjust fabric, touch Pivot .
Sew:
• Step on foot control. The Sensor Foot lowers
automatically.
• Seam/Overcast along one edge
• Touch .
Repeat the Seam/Overcast technique on Stretch
heavy fabric (B) and on Woven heavy fabric (C).
Your Sewing Advisor will select the best stitch,
length, width, tension, pres ser foot pressure and
sewing speed for each fabric type. Follow other
recommendations given on the Color Touch
Screen.
Seam/Overcast for ribbing
The Seam/Overcast technique is perfect for stit-
ching ribbed neckbands and cuffs. Cut a mock
neckline in a Stretch medium fabric, touch
Stretch medium and Seam/Overcast in the Se-
wing Advisor and sew a piece of ribbing to the
mock neckline with a 1/4" (6 mm) seam allo-
wance, stretch ribbing as you sew.
45