Husqvarna Viking Designer I Usb User Manual page 44

Utility/Garment Sewing
Overcast
Overcast fabric edges to prevent fraying and to
help them lay fl at. It is easiest to overcast before
the garment is sewn together. The J pres ser foot
is recommended for light and medium weight
fabric to pre vent puckering along the edge. The
B pres ser foot for heavy weight fabric. Your
Sewing Advisor will select the best length and
width for the fabric weight.
Fabric: Woven medium
Touch: Woven medium on your Sewing
Advisor,Overcast on the technique screen. (The
Sewing Advisor selects a 3-step zigzag stitch.)
Snap on: Presser foot J as recommended.
Use: Size 80 needle as recommended.
Place the edge of a single thickness of fabric un-
der presser foot J with the pin on the foot along
the edge of the fabric. The 3 step zigzag stitch
sews over the pin to keep the edge of the fabric
fl at.
If you need to adjust fabric, touch Pivot .
Sew:
• Step on foot control. The Sensor Foot lowers
automatically.
• Sew to overcast the edge of the fabric.
• Touch .
Note: It is not necessary to overcast leather or vinyl,
but the Sewing Advisor gives you the possibility.
Touch Leather or Vi nyl on your Sewing Advisor,
Overcast on the technique screen. (The Sewing Ad-
visor selects a zigzag stitch).
44