Learn Your Designer I Usb; Color Touch Screen - Husqvarna Viking Designer I Usb User Manual

Color Touch Screen

USB
Designer I
features an LCD Color Touch
Screen at the front right of the machine.
The Color Touch Screen is very easy to work
with. Just touch it with your fi nger tip or a stylus
to select a stitch menu or function tab.
On/Off
USB
When Designer I is off the screen will be
dark grey. When it is turned on you will fi rst
see a Welcome Screen, then the Main Menu will
appear.
Screen Saver
Your Color Touch Screen can be left on all the
time. If you prefer you can set a screen saver
to come on after 9 minutes. See Screen Saver,
page 30.
USB Embroidery Stick
Delivered with your Designer I
I USB Embroidery Stick, the 3D Disk Manager
USB and 3D QuickFont computer programs.
Upon delivery, 31 designs and 3 fonts are stored
on the Designer I USB Embroidery Stick. It
is also possible to store up to 15 customized
embroideries on the stick.
Switch write protection on and off with the
switch on the side of the Designer I USB
Embroidery Stick.
N : The Designer I USB Embroidery Stick must be
OTE
Designer I
removed from your
write protection on and off.
Only original Husqvarna Viking USB Sticks
should be used. For additional memories
purchase another Husqvarna Viking USB Stick
from your Husqvarna Viking dealer.
3D Disk Manager USB
Use the 3D Disk Manager USB included on the
Designer I USB CD to prepare the Husqvarna
Viking USB Stick for reading and writing. Follow
the instructions for the 3D Disk Manager USB
computer program included on the Designer I
USB CD.
3D QuickFont
You can create different lettering fonts from
the fonts in your pc computer following the
instructions for the 3D QuickFont computer
program included on the Designer I USB CD.
Learn your Designer I
USB
is a Designer
USB
before switching
USB
Right position – write protected
Left position – not write protected
Connect to and Remove from USB port
The Designer I USB Embroidery Stick can only
be inserted one way — do not force it into the
port! A light at the end of the stick indicates that
the Designer I USB Embroidery Stick is plugged
in correctly. When loading from or saving to
the Designer I USB Embroidery Stick, the light
fl ashes and an hourglass appears on screen. To
remove, carefully pull the Designer I USB Em-
broidery Stick out straight.
Do not remove the Designer I USB
!
Embroidery Stick while the light is
fl ashing or when the hourglass is shown,
as this can damage the fi les on your
Designer I USB Embroidery Stick.
USB
EXCL CLUSIVE SENSOR S EX USIVE SENSOR SYSTEM TEM
USB
EXCL CLUSIVE SENSOR S EX USIVE SENSOR SYSTEM TEM
17