Built-In Stitches In The Hoop; Embroidery - Husqvarna Viking Designer I Usb User Manual

Embroidery

Built-in stitches in the hoop

Sew built in stitches (except stitches from B, S,
U and V menus and stitches where the reverse
button is used) within the hoop. Also combina-
tions from memories M1-M15 can be sewn.
Use , , and for built in stitches in
embroidery mode. The stitch number or me-
mory number for the built in stitches are shown
above the stitch area.
USB
The Designer I will stop automati-
cally when the sewn stitches reach the
edge of the hoop, and you will also
see a pop-up menu.
If a stitch is parallel to an edge but
too close, the touch screen will dis play only the
stitches that can be sewn out.
How to sew built-in stitches
To sew, select a stitch or a stitch pro gram. To
access the memories, touch in , and se-
lect desired memory.
Use the positioning arrows to po si tion
the star ting point. The starting point and se-
wing direction will be dis play ed on the Color
Touch Screen.
To change stitch direction, stop sewing, touch
, touch the ro ta tion icon . The built-in
stitches can be rotated in 45° steps. Touch to
see the stitch direction dis play ed.
This feature makes it easy to stitch, for example,
a beautiful frame of stitches around an embroi-
dery.
82