Husqvarna Viking Designer I Usb User Manual page 81

Embroidery
A new Pop-up menu appears.
The Designer I USB Embroidery Stick memories
USB
for your designs customized in the Designer I
is indicated with .
Empty memories are indicated with green color,
in this case memory D01 is empty, .
Step memory numbers with .
If you wish to save design, touch , if not
touch .
Full memories are indicated with red color, in
this case memory D7 is full, .
Loading your saved designs from the
Designer I USB Embroidery Stick
USB
Turn on your Designer I or select until
you re turn to Main menu.
Select .
Note: can only be selected when the Main
menu is displayed on the Color Touch Screen.
Select . A pop-up menu appears. "Load com-
bination" with two boxes to select from.
M allows you to select programmed built-in stit-
ches, and lettering, from one of the 15 memo-
ries that have been programmed from the stitch
menus in the machine, by stepping through the
memories.
D allows you to select from the memories on
the Designer I USB Embroidery Stick. These
are embroideries and lettering that you have
programmed in Built-In Color Customizing
and saved to the USB Embroidery Stick. There
are 15 memories to select from. For additional
memories purchase another Husqvarna Viking
USB Stick from your Husqvarna Viking Dealer.
Step through the memories with .
Empty memories are indicated with , and
full memories with .
Select the memory required, touch .
The saved combination will appear on the Color
Touch Screen. A box appears around the fi rst
design in the combination, indicating it can be
worked with. will select other designs in the
combination allowing for further adjustments.
Select to stitch out the saved combination.
81