Sensor Foot; Changing The Presser Foot - Husqvarna Viking Designer I Usb User Manual

Sensor Foot Pressure
When selecting different fabric weights on the
Sewing Advisor, the pressure will be adjusted
automatically. Thanks to the Sensor Foot Pressu-
re, the presser foot actually senses the thickness
of fabric or embroidery or stitching to sew over
it smoothly and evenly.
Touch on the Color Touch Screen and you
will see the actual setting of the pres ser foot
pressure for the selected fabric.
You can adjust the presser foot pressure by
pres sing the buttons (+) or (-) on the
The higher the number the more pressure on
the fabric.
Sensor Foot Lift
The presser foot is automatically lowered when
you start your sewing.
When you stop with the needle in the down
position, the pres ser foot is automatically lifted
to pivot position.
If you have selected Needle stop up:
UP – Raises the pres ser foot and the needle
to up po si tion. Touch twice for ex tra lift. Makes
it easier to get thick garments under the pres ser
foot.
If you have selected Needle stop down:
UP – Raises the presser foot to up position
but the needle stays down in the fabric. Touch
twice – the needle raises to up po si tion and the
pres ser foot to the extra lift for easy removal of
fabric.
PIVOT – Sets foot to pivot position.
DOWN – Lowers the presser foot.

Changing the presser foot

Turn off the main switch.
1. Make sure that the needle is in the highest
position. Pull the presser foot towards you.
2. Line up the cross pin on the foot between the
spring and the presser foot ankle. Press back
until the foot snaps into place.
USB
Learn your Designer I
menu.
13