Accessory Tray/Sewing Surface - Husqvarna Viking Designer I Usb User Manual

Accessory Tray / Sewing surface
In the Accessory Tray there are special pockets
for presser feet, bobbins and needles plus space
for other accessories. Store the accessories in the
tray so they are easily accessible.
Slide the Accessory Tray on to the machine to
provide a larger work surface. Slide the Accessory
Tray to the left, passing the stop po si tion and re-
move it if you wish to use the free arm.
A work surface extension is stored inside the
rear cover of the tray.
1. Slide the Accessory Tray to the left until you
have just passed the stop position.
2. Place the work surface extension into the
space that appears between the tray and the
machine and push the tray back.
USB
Learn your Designer I
7