Pop Up Menus - Husqvarna Viking Designer I Usb User Manual

Pop-up menus
Top Thread Break
USB
Your Designer I
stops automatically if the top
thread runs out or breaks. Rethread the top th-
read, touch .
Empty Bobbin
USB
Your Designer I stops automatically when
the bobbin thread is almost empty. Replace the
empty bobbin with a full one, touch
Note: It is possible to continue sewing un til all
thread on the bobbin has run out.
Twin needle
When the twin needle safety button
the menu, the width of the stitches is
limited. If you select a stitch that is too wide the
twin needle pop-up appears. The stitch width of
the selected stitch is adjusted automatically to fi t
the twin needle setting.
The twin needle pop-up also appears if the twin
needle safety button is set when the machine is
turned on.
Touch the -tab and touch the single needle
button to cancel the twin needle safety.
Sensor foot Q
Sensor Q-foot (optional) is set to
menu. Change to to cancel.
Stitch Width Safety
If you have been using a straight stitch plate (op-
tional) or the P-foot and have set the stitch width
USB
safety, the Designer I
on the machine or when selecting a stitch that
has stitch width more than 0.0.
Learn your Designer I
.
is set in
in the
alerts you when turning
USB
33