-Stitch Positioning - Husqvarna Viking DESIGNER RUBY deLuxe Step-By-Step Handbook

DESIGNER RUBY deLuxe

#3 -Stitch Positioning

1
Select Sewing Mode.
Select Woven Medium on the Exclusive SEWING
2
®
ADVISOR on the lower toolbar.
3
Touch Start Menu to open the Extended Tool Bar.
4
Touch Stich Menu F, Appliqué Stitches.
5
Select stich #8.
Touch Stitch Width + to 6.0. The stitch width number
changes to red. Watch the stitch change on the
6
Large Interactive Screen. The sideways stitches of the
appliqué stitch get wider.
Touch – to reduce the stitch width to the default 2.0.
7
The default number is displayed in black.
The ALT button appears on the screen next to Stitch
Width icon on most of the built-in stitches.
It lets you adjust the position of the stitch from left to
right. for accurate stitch placement.
8
Note: The stitch must be less than 7.0 mm wide to use
the stitch positioning feature. Reduce stitch width if
needed to activate the ALT icon.
Touch ALT.
Touch the Stitch Positioning +. The sideways stitches of
9
the stitch remain the same as the stitch position moves
to the right.
Place Tear-A-Way Stabilizer underneath your fabric and
10
try it.
™
Techniques
#3 - Stitch Positioning 8