Buttonhole - Husqvarna Viking Designer I Usb User Manual

Buttonhole

The Sewing Advisor will select the best button-
hole and stitch settings for your fabric. Fabric
should be interfaced and/or stabilized where
buttonholes are to be sewn.
Mark the buttonhole placement on your fabric
with your Pictogram pen™.
You can also select your buttonhole from the
Buttonhole Menu B.
Fabric: Woven medium and stabilizer
Touch: Woven medium on Sewing Advisor fa-
bric screen. Buttonhole on technique screen.
Snap on: Sensor Buttonhole Foot as indicated
on the Color Touch Screen by the red wheel
next to the foot. Plug the cord into the socket in
the left front un der si de corner of the machine.
Line up the white range on the side of the wheel
with the white marking line on the foot.
Use: Size 80 needle as recomended.
Enter the buttonhole size with the
button. Average buttonhole sizes are:
5/8" = 16mm, 3/4"=20mm, 1"=25 mm. Maximum
size: 2" = 50mm.
Many button packages list the size of the button.
Otherwise use the Buttonhole Ruler which is po-
sitioned on the baseplate on your Designer I
The buttonhole size needed will vary with the
thickness and style of your button. Always stitch
a sample buttonhole on scraps fi rst.
Sew:
• Fold fabric in two and place stabilizer under-
neath.
• Place under Sensor Buttonhole Foot. The
measurement wheel can be raised to a stop,
which makes it easier to place the fabric un-
der the presser foot.
• If you need to adjust fabric, touch Pivot
Use the markings on the left toe of the Sensor
Buttonhole Foot to position the garment edge.
The middle mark gives a 5/8" (15 mm) distance
to fabric edge.
Utility/Garment Sewing
or
USB
.
.
Buttonhole Ruler
5/8" (15 mm)
49