Husqvarna Viking Designer I Usb User Manual page 20

Specialty Stitch Menus
In the Main Menu there are 21 choices, 20 stitch
menus and one disk icon.
Utility Stitches
Menu A features stitches for your garment
sewing, mending and darning.
Buttonholes
Menu B features different styles of buttonholes,
eyelets and button sewing. For best result use
the Sensor Buttonhole Foot.
Decorative Menus
Beautiful stitches for your creative sewing on
stitch menus C -N.
Letters and Numbers
Choose from 4 different types of letters and
numbers. Block, Menu O, Outline block, Menu P,
Brush line, Menu Q (9 mm) and Menu R Script.
Each lettering menu has 3 menus for upper case
and lower case letters and numbers.
4-Way Stitches
Menu S is used to sew stitches in 4 different di-
rections. Stitches are fi xed in length and width.
The arrow indicates sewing direction of stitches.
8-Way Stitches
Menu T is used to sew in 8 different directions.
There are 2 different types of stitches, straight
and reinforced straight.
My Stitches
Use Menu U (My Stitches) to save favorite stit-
ches or special settings to a stitch. Adjustments
made in the ADJUST menu and settings as ten-
sion, balance and presser foot pressure in the
SET menu will be saved together with the stitch.
Special Stitches
Menu V includes 4 different types of "free mo-
tion technique" stitches. When you are using this
menu the feed teeth should be lowered.
Embroidery Disk Icon
View and load embroideries with your
USB
Designer I
by inserting the Designer I USB
Embroidery Stick into the Built-in USB port.
Touch the disk icon. This allows you to view
the embroideries. To load an embroidery, your
embroidery unit must be attached to your
USB
Designer I .
20
USB
Learn your Designer I