Feed Teeth - Husqvarna Viking Designer I Usb User Manual

USB
Learn your Designer I
Presser foot S
S
This foot is used for side-motion stitches.
Transparent presser foot
For decorative sewing. Ma kes it easy to match
patterns. Same as Presser foot B.
Sensor Buttonhole Foot
When connected to the machine it measures but-
tonhole length and sews the buttonhole size that
has been entered into the machine. The end of
the short toe is 3/8" from needle and end of
long toe is 3/4" from needle
Self-adhesive glide plates
Used for the presser foot C/Sensor Buttonhole Foot
when sewing plastic-coated fabrics, leather etc.
Lowering the feed teeth
The feed teeth are lowered when you turn the
dial to the left . Turn the dial to the right
if you wish to raise the feed teeth. The feed te-
eth will raise as you begin to sew.
The feed teeth should be lowered for sewing on
buttons and for free-motion work.
Tip: By lowering the feed teeth it is easier to get
thick fabrics like terry cloth under the pres ser
foot. Raise the feed teeth before star ting to sew.
Note: The feed teeth are lowered automatically
when the embroidery unit is put in place. When re-
mo ving the embroidery unit, the feed teeth will raise
as you start to sew.
15