Google Map Report With Address - Sanav MU-201 User Manual

Google MAP Report with Address

Use this command to define the SMS report format when route is set at 4. SMS, or Answer Call Mode is set at "2" or "3".
There are 2 modes: 1) GPRMC Format and 2) SMS Google Map Format.
With SMS Google Map Format, the device will send the device location in Google Map hyper-link. It can be shown on the
mobile browser which supports Google Map display (GPRS/3G required).
User also can use this command to have the device send location address information which corresponds to the nearest
position of the device.
The Google Map hyper-link and address information can be set both available or individually. There will be 2 separate
messages sent to the caller's cell phone if both Google Map hyper-link and address are enabled, one is Google Map
hyper-link sentence and the other is address sentence.
Setup Format: #「username」,「Password」,「Function Mode」, 「on/off」*
Command: #username,0000,google,3*
Google Map hyper-link sentence example:
http://maps.google.com/maps?q=24.963544,121.425648(tracker)&,AUTO, V3.793;56%
Original GPRMC Format sentence example:
username,$GPRMC,052720.00,A,2457.48758,N,12125.32333,E,1.015,128.84,100312,,,A*66,AUTO,V3.793;56%
Address message sentence example:
No.36, Zhongshan Rd, Tucheng District, Xinbei, Taiwan 236
SMS/ COTA Command
#
username
0000
google
3
*
30
MU-201 GPS/GPRS Nano Tracker User Manual
Description
Start sign.
Default ID of MU-58.
If you have changed the Username, please use the updated one.
Default password.
If you have changed the password, please use the updated one.
Mode "google" defines the Google Map Address setup mode.
0 google hyper-link OFF; addr OFF
1 google hyper-link ON; addr OFF
2 google hyper-link OFF; addr ON
3 google hyper-link ON; addr ON
End sign.
Table: Google Map Address Setup Format Description
Copyright © 2011 San Jose Technology, Inc. All Rights Reserved.