Page 102
'- - + < ! & + 5< - 8.11 AT^SMONI Monitoring Serving Cell command supplies information of the serving cell. AT^SMONI Syntax Test Command AT^SMONI=? Response(s) Exec Command AT^SMONI Response(s) See: Section 8.11.1, AT^SMONI Responses Write Command Response(s) Last Notes The parameters LAC and cell are presented as hexadecimal digits, the remaining parameters are •...
Page 103
8.11.1 AT^SMONI Responses ME is not connected: ME is camping on a GSM (2G) cell: • Syntax: ^SMONI: ACT,ARFCN,BCCH,MCC,MNC,LAC,cell,C1,C2,NCC,BCC,GPRS,ARFCN,TS,timA dv,dBm,Q,ChMod Example: ^SMONI: 2G,71,-61,262,02,0143,83BA,33,33,3,6,G,NOCONN ME is camping on a UMTS (3G) cell: • Syntax: ^SMONI: ACT,UARFCN,PSC,EC/n0,RSCP,MCC,MNC,LAC,cell,SQual,SRxLev,PhysCh, SF,Slot,EC/ n0,RSCP,ComMod,HSUPA,HSDPA Example: ^SMONI: 3G,10564,296,-7.5,-79,262,02,0143,00228FF,-92,-78,NOCONN ME is searching and could not (yet) find a suitable GSM (2G) cell: •...
Page 104
^SMONI: ACT,ARFCN,BCCH,MCC,MNC,LAC,cell,C1,C2,NCC,BCC,GPRS,ARFCN,TS,timA dv,dBm,Q,ChMod Example: ^SMONI: 2G,673,-80,262,07,4EED,A500,35,35,7,4,G,643,4,0,-80,0,S_FR UMTS (3G) cell: • Syntax: ^SMONI: ACT,UARFCN,PSC,EC/n0,RSCP,MCC,MNC,LAC,cell,SQual,SRxLev,PhysCh , SF,Slot,EC/ n0,RSCP,ComMod,HSUPA,HSDPA Example: ^SMONI: 3G,10737,131,-5,-93,260,01,7D3D,C80BC9A,21,11,EDCH,256,4,-5,-93, 0,01,06 Columns for GSM (2) Serving Cell parameters: Column Description Access Technology ARFCN ARFCN (Absolute Radio Frequency Channel Number) of the BCCH carrier BCCH Receiving level of the BCCH carrier in dBm...
Page 105
Column Description Access Technology UARFCN UARFCN (UTRAN Absolute Radio Frequency Channel Number) of the BCCH carrier Primary Scrambling Code Carrier to noise ratio in dB = measured Ec/Io value in dB. Please refer to EC/n0 3GPP 25.133, section 9.1.2.3, Table 9.9 for details on the mapping from EC/n0 to EC/Io.
Page 106
= ME Call Status: 0 - HSUPA inactive, 1 - HSUPA active HSDPA Status indicated by xy: HSDPA = Cell Capability Indicator: 0 - HSDPA capability not indicated, 1 - HSDPA Capable Cell. Please consider that some providers/MNOs don't support this flag and that it is provided ‘for display indication only’, see 3GPP TS 25.331 [41] (later than version 6.8.0), section 10.2.48.8.8.
Page 107
8.12 AT^SMONP Monitoring Neighbour Cells supplies information of active cells and all neighbour cells. The active cell AT^SMONP information will be delivered additively because an ME can be situated in Soft Handover or Softer Handover. Syntax Test Command AT^SMONP=? Response(s) Exec Command AT^SMONP Response(s)
Page 108
8.12.1 AT^SMONP Responses Responses of execute command: AT^SMONP In case of a GSM (2G) serving cell: • Syntax: 2 G : ARFCN ,dBm ,MCC ,MNC ,NCC ,BCC ,LAC ,cell ARFCN ,dBm ,MCC ,MNC ,NCC ,BCC ,LAC ,cell ARFCN ,dBm ,MCC ,MNC ,NCC ,BCC...
Page 110
cell selection criterion cell reselection criterion Location area code cell Cell identifier Columns for UMTS (3G) parameters: Column Description UARFCN UTRAN Absolute Radio Frequency Channel Number of the BCCH carrier Primary Scrambling Code Carrier to noise ratio in dB = measured Ec/Io value in dB. Please refer to EC/n0 3GPP 25.133, section 9.1.2.3, Table 9.9 for details on the mapping from EC/n0...
Page 111
8.12.2 Service states Depending on the service state, an additional textual output is generated (refer also to the response examples): 'SEARCH' (Searching) - The MS is searching, but could not (yet) find a suitable cell. This output • appears after restart of the MS or after loss of coverage. 'NOCONN' (No connection) - The MS is camping on a cell and registered to the network.