Mu-201 Hardware General Introduction; Specification - Sanav MU-201 User Manual

MU-201 Hardware General Introduction

Specification

GSM
Frequency:
GPRS:
RMS Phase Error:
Max Out RF power:
Dynamic Input Range:
Receiving Sensitivity:
Stability Of Frequency:
Max Frequency Error:
GPS
GPS Chipset:
Receiver Type
Sensitivity:
TTFF (Open Sky):
User Interface
Mini USB Connector:
Power Button:
General
Dimension:
Weight:
Backup Battery:
Standby Time:
Charge Voltage
Air Interface Protocol
Transmit Protocol:
Geo-Fence:
Low Power Alarm:
Power On Report:
Operating Environment
Operating Temperature
Storage Temperature
*This specification is subject to change without prior notice
1
MU-201 GPS/GPRS Nano Tracker User Manual
Quad-Band: 850/900/1800/1900MHz
Compliant to GSM phase 2/2+
-Class 4 (2W @ 850/900MHz)
-Class 1 (1W @ 1800/1900MHz)
GPRS multi-slot class 10
GPRS mobile station class B
≤5deg
33.0dBm±2dBm
-15 ~ -102 dBm
Class II RBER≤2％（-102dBm）
Greater than 2.5ppm
±0.1ppm
UBX-G5010
50 Channels
GPS L1 frequency, C/A Code
GALILEO Open Service L1 frequency
Tracking & Navigation -160 dBm
Acquisition -160 dBm
Cold Start (Autonomous) -145 dBm
Cold start 40 s average
Include charger
Power on and power off.
60mm* 35 mm * 19mm
65 g
Li-Polymer 650 mAh , 3.7V
10 minutes reporting: 50 Hours (estimation)
60 minutes reporting: 100 Hours (estimation)
5 V DC
TCP,UDP,SMS
10 Geo-Fence regions can be defined.
Alarm when battery is low
Report on power up
0°C to +55°C
-20°C to +85°C
Warm start <30s
Copyright © 2011 San Jose Technology, Inc. All Rights Reserved.
Hot start <2 s