Set Up Tcp/Udp Server Address - Sanav MU-201 User Manual

Set up TCP/UDP Server Address

User can use IP address setup command to indicate the device transmit GPS (GPRMC) positioning data to a specified TCP
or UDP protocol based server for real time tracking.
Entering the SMS command as the following allows user to change the address to specified IP and port. The IP address will
be assigned to receive the GPS data sent by the device.
Setup Format: #「username」,「Password」,「Function Mode」, 「TCP/UDP server address」*
Command: #username,0000,18,220.128.123.1:7878 *
Or #username,0000,18,icare-u.com.tw:12345*
SMS/ COTA Command
#
username
0000
18
220.128.123.1:7878
*
Situation
Setup Succeeds
Emergency Mode
15
MU-201 GPS/GPRS Nano Tracker User Manual
Description
Start sign.
Default ID of the device.
If you have changed the user name, please use the updated one.
Default password.
If you have changed the password, please use the updated one.
Mode 18 defines the TCP/UDP Server Address setup mode.
TCP/UDP Server Address and Port / Domain name
End sign.
Table: Server Address Setup Format Description
Message Reply
<OK>TCP/UDP URL setup, V3.793;56%
<FAIL>PANIC ON; Command not Allow!,V4.091;98%
Table: Server Address Setup Response Description
Copyright © 2011 San Jose Technology, Inc. All Rights Reserved.