Reset To Default Setting - Sanav MU-201 User Manual

Reset to Default Setting

Use this command to reset the device to default/factory setting. It will recover all the current parameters to default values
includes username and password.
Setup Format: #「username」,「Password」,「Function Mode」*
Command: #username,0000,9*
SMS/ COTA Command
#
username
0000
9
*
Situation
Setup Succeeds
Emergency Mode
54
MU-201 GPS/GPRS Nano Tracker User Manual
Description
Start sign.
Default ID of the device.
If you have changed the user name, please use the updated one.
Default password.
If you have changed the password, please use the updated one.
Mode 9 defines the Default Setting setup mode.
End sign.
Table: Default Setting Setup Format Description
Message Reply
<OK>Reset to default, V3.793;56%
<FAIL>PANIC ON; Command not Allow!,V4.091;98%
Table: Default Setting Setup Response Description
Copyright © 2011 San Jose Technology, Inc. All Rights Reserved.