Micro Tracker. This deliberately edited manual is to introduce the users, to provide the complete technical data that is needed, and so as to operate G-19 smoothly and correctly as soon as possible. Make sure to read this manual carefully before using this product. Most problems will be solved through the explanations and the troubleshooting tips.
Chapter 1 Hardware Description GSM Status LED GPS Status LED Park Button Emergency Panic Button ON/OFF Switch SIM Card Slot Eject Button Park LED Reserved Com Port DC Power Connecter (Engineering Test Only)
Page 5
GSM Red LED (Left): Blinking when G-19 is searching GSM network service Light still and have a short blinking every 4 seconds when GSM service is available Off when no power GPS Blue LED (Right): Off when GPS is not available...
G-19 unable to acquire GSM Network Communication. Use the Cigarette Lighter in your package. Plug the Lighter connecter into the power source of your car, and then plug the DC jack into G-19 to receive power supply. Turn the power switch on.
G-19 through your cellular, then you will receive a respond message. G-19 can accept any cellular phone call and reply SMS message to the one that is calling. Note: Once the “Own Number Sending” function is deactivated in your cellular phone, G-19 will not recognize the calling number so as to lose polling function.
Please note that it has no space between the words and commas in the setup message. The security “Pin Code” function of the SIM card must be off; otherwise, G-19 will not access SIM card and get the GSM Network service.
Use this SMS message to setup the ID of your G-19. #: Start sign ID: Username is the default ID of G-19. It can be 8 digits at most. Input less than 8 digits will also be accepted. Password: Default Password is “0000”.
Please do not forget to add a “+” sign before the country code. Example: +491783496936 (German) 2. If you want to setup only 1 set of phone number for G-19 to report, you need to add 4 commas ”,” before the end sign “*”. G-19 needs to recognize and separate different built-in numbers.
Report function, set the interval as “000”. The default setting of auto report is also off. Report Frequency: This function is to setup how many times G-19 will report to the user in Auto Report and Parking function. This parameter must be 2 digits. For instance, if you setup the report frequency for “02”, G-19 will send SMS 2 times to the indicated cellular phone and then...
Parking Command: You have to input “4” to start the Park function. *: End sign When the start of Park function of G-19 is setup successfully, G-19 will reply a SMS message: Username setup OK. G-19 parking. But if fail, G-19 will reply a SMS message: Username setup fail.
Username setup OK. G-19 reset to default. But if fail, G-19 will reply a SMS message: Username setup fail. When G-19 is in Emergency Mode, reset is not allowed. Anyone want to reset G-19 will be replied: Username in emergency, reset not allowed.
Username setup OK. G-19 password updated. But if fail, G-19 will reply a SMS message: Username setup fail. When G-19 is in Emergency Mode, reset is not allowed. Anyone want to reset G-19 will be replied: Username in emergency, password setup not allowed.
Polling and Auto Report. Data Valid Time: This segment indicates GPS data validity of G-19. If this segment is “now”, it indicates GPS fix is in real time. If this segment is in 24 hour time format such as “17:26”, it indicates G-19 currently cannot receive enough GPS signal to fix position so as to send the last GPRMC data at that time (it will be transformed to local time directly).
Data Valid Time: This segment indicates GPS data validity of G-19. If this segment is “now”, it indicates GPS fix is in real time. If this segment is in 24 hour time format such as “17:26”, it indicates G-19 currently cannot receive enough GPS signal to fix position so as to send the last GPRMC data at that time (it will be transformed to local time directly).
(But the SMS will always be sent disregarding the buzzer) Data Valid Time: This segment indicates GPS data validity of G-19. If this segment is “now”, it indicates GPS fix is in real time. If this segment is in 24 hour time format such as “17:26”, it indicates G-19 currently cannot receive enough GPS signal to fix position so as to send the last GPRMC data at that time (it will be transformed to local time directly).
Any incidental or consequential losses or damages result from the purchase. Disaster, accident, cost or loss of any substitutive equipment. For damages caused under the above conditions, we'll contact you to discuss replacement options. 9F NO. 105 SHI-CHENG ROAD, PAN-CHIAO CITY TAIPEI HSIEN, TAIWAN, R.O.C. TEL: 886-2-26879500 FAX: 886-2-26878893 WWW.SANAV.COM...