Sanav MU-201 User Manual page 55

Power OFF Message
User can use the command to have the device send Power OFF report when pressing power button to turn OFF the device.
Therefore, the device will be turned OFF for a while (about 10 seconds) when pressing power button.
Command: #poweroffsend,on*
SMS/ COTA Command
#
poweroffsend
on
*
Situation
Setup Succeeds
50
MU-201 GPS/GPRS Nano Tracker User Manual
Description
Start sign.
Mode "poweroffsend" defines the Power OFF message mode.
on Enable the power off message function. Show report when turn off.
off Disable the power off message function.
End sign.
Table: Power OFF Message Setup Description
Message Reply
<OK>POWEROFFSEND ON,V4.169;100%
Table: Power OFF Message Setup Response Description
Copyright © 2011 San Jose Technology, Inc. All Rights Reserved.