Report Interval Setup - Sanav TRACKSTARIII User Manual

Use this SMS message to set up the frequency for Auto Report function after
you send the SMS according to E.g.3 seen below, you will have an Auto Report Message every 2 minutes. After 12
Auto Report messages are sent, TRACKSTARIII will stop sending.
E.g.3
#Username,0000,3,002,12*
The table 4.3.1 is describing the meaning of each segment in the message above.
Text Keyed In SMS
#
Username
0000
3
002
12
*
The table 4.3.2 is showing each confirm message reply after setup.
Situation
Setup Succeeds
Setup Fail
Incorrect password
TRACKSTARIII is in Emergency
Mode
4.3 Auto Report Interval Setup
Start sign.
Default ID of TRACKSTARIII.
Default password.
If you have changed the password, please use the updated one.
Mode 3 is representing report interval setup.
Auto Report interval in minutes.
This parameter must be 3 digits. The minimum unit is 002 and maximum is
120 minutes.
For example, 002 means that an Auto Report message will be sent every 2
minutes.
To cancel Auto Report function, set the interval as "000". The default setting
of auto report is also off.
Total number of SMS will be sent.
This parameter must be 2 digits.
For example, 12 means that only 12 Auto Report messages will be sent in total. After
that, TRACKSTARIII will stop sending.
If you set up this value being "00", the TRACKSTARIII will stop Auto Report.
End sign.
Username setup OK. TRACKSTARIII auto-report.
Username setup fail.
Username password error
Username in emergency, auto-report not allowed.
Description
Table 4.3.1
Message Reply
Table 4.3.2
predefining the cellular number(s). If
16