Set Up Phone Book List - Sanav MU-201 User Manual

Set up Phone Book List

There are three main purposes of Phone Book List setup:
1. Backup Route: As a backup route when the data is not able to send to the server. The data will be sent to 1
number PH-01 only.
2. SOS Alarm Route: When the device is in SOS mode, it will send SOS event report to the phone numbers in the list.
3. SMS Data Route: When the data route is set to SMS, the device will send GPRMC data to to 1
only.
Use this SMS command to set up the cellular phone book (Max. of 3 numbers) as the following format:
Setup Format: #「username」,「Password」,「Function Mode」,「PH-01」,「PH-02」,「PH-03」*
Command: #username,0000,5,+886123456789,+492234567890,+866323456789*
Note1: Add or not add the "+ "sign in front of the cellular phone numbers are both acceptable, while the"+" sign should
precede the international call prefixes.
Note2: When the Phone Book is set and Security Phone Book is enabled, the numbers will be considered as security
numbers. Only the security numbers are allowed to do the command setting and overhearing (answer call) from the
device.
SMS/ COTA Command
#
username
0000
5
+886123456789
+492234567890
+866323456789
*
Situation
Setup Succeeds
Emergency Mode
16
MU-201 GPS/GPRS Nano Tracker User Manual
Description
Start sign.
 Default ID of the device.
 If you have changed the user name, please use the updated one.
 Default password.

If you have changed the password, please use the updated one.
Mode 5 defines the Phone Book List setup mode.
st
1 cellular numbers, PH-01
nd
2 cellular numbers, PH-02
rd
3 cellular numbers, PH-03
End sign.
Table: Phone Book List Setup Format Description
Message Reply
<OK>;P1=0935304180;P2=;P3=, V3.793;56%
<FAIL>PANIC ON; Command not Allow!,V4.091;98%
Table: Phone Number List Setup Response Description
Copyright © 2011 San Jose Technology, Inc. All Rights Reserved.
st
cellular
st
cellular number PH-01