Set Up Phone Number List - Sanav GC-101 User Manual

5.5 Set up Phone Number List

Setup format: #「username」,「Password」,「Function Code」,「PH-01」,「PH-02」,「PH-03」*
Example：#username,0000,5,+886123456789,+492234567890,+866323456789*
Note that both adding and not adding the "+ "sign in front of the cellular phone number(s) are both acceptable,
while the"+" sign should precede the national code.
The table 5.5.1 describes the meaning of each segment in the message above.
Text Keyed In SMS
#
username
0000
5
+886123456789
+492234567890
+866323456789
*
The table 5.5.2 shows each confirmation message reply after setup.
Situation
Setup Succeeds
Setup Fail
Non-numeric data is input for numbers
Incorrect password
Incorrect username or command format
GC-101 is in Emergency Mode
Note: The program will overwrite the previous contact list if the users do this setup.
Description
Start sign.
 Default ID of GC-101.
 If you have changed the Username, please use the updated one.
 Default password.
 If you have changed the password, please use the updated one.
Mode 5 defines the changes of the built-in phone number list.
st
1 cellular numbers, PH-01
nd
2 cellular numbers, PH-02
rd
3 cellular numbers, PH-03
End sign.
Message Reply
[username] + GC-101 phone book is updated.
[username] + GC-101 phone book setup Fail!
[username] + Parameter error
[username] + Password setup Fail!
[username] + command error
[username] + in emergency, phone book setup is not allowed.
Table 5.5.1
Table 5.5.2
13