Setup Security Phone Book - Sanav MU-201 User Manual

4.18 Setup Security Phone Book

Users can use this command to define the Security Phone book; the maximum numbers is 10 sets.
Please note that SOS Phone + Default Phone Book (3 sets) = 4 sets numbers are also considered Security Phone numbers;
so you basically have 14 sets Security Phone Numbers available for setup.
Setup format：#「username」,「Password」,「secphone」, 「1~10」, 「Phone number」*
Example:
Command: #username,0000,secphone,1,+886123456789*
Note that both adding and not adding the "+ "sign in front of the cellular phone number(s) are both acceptable,
while the"+" sign should precede the national code.
The table 4.18.1 describes the meaning of each segment in the message above
Text Keyed In SMS
#
username
0000
Secphone
1
+886123456789
*
Situation
Setup Succeeds
MU-201 is in Emergency Mode
Description
Start sign.
Default ID of MU-201.
If you have changed the Username, please use the updated one.
Default password.
If you have changed the password, please use the updated one.
The Function code to setup Security Phone Book Numbers.
The ID of each phone number. You can put 1~10 here
The Security Phone number you would like to assign to the ID.
End sign.
Table 4.18.1 The explanation of each segment of command
The table 4.18.2 shows each confirmation message reply after setup
Message Reply
Security Phone setting is OK!Security_phone(1)=0910061229,3.807V
in emergency, Security phone settging is not allowed.,3.807V
29