Table of Contents
Advertisement
Normal - This setting is useful for fast, better than average quality printing on paper
media. This is a three pass mode.
Best - For images that have sections of high quality continuous tone where quality is
more important than printing speed. This is a four pass mode.
To choose print quality
1
Choose Setup Menu/Print Modes/Quality=.
2
Press Select.
3
Use the up or down arrow button to display the desired quality.
4
Press Select.
Resolution
Resolution refers to the dots per inch (dpi) which make up the image. You can choose
either 300 or 600 dpi. This resolution setting overrides the default dpi in the quality
mode setting.
To choose resolution
1
Choose Setup Menu/Print Modes/DPI=.
2
Press Select.
3
Use the up or down arrow button to display the desired resolution.
4
Press Select.
Important notes about image size vs. dpi
For best results, be sure the printer dpi setting matches the image resolution in the file
you are printing. Mismatches in dpi will cause the image to be resized as described in
the table which follows.
The printer always prints at 600 dpi, even when the dpi setting in the Print Modes menu
is set to 300 dpi. The dpi setting refers to the resolution at which your image is created,
not the resolution at which it is printed.
ENCAD
®
T-200
TM
Reference Guide
Printer Options 2-5
Advertisement
Table of Contents
