Table of Contents
Advertisement
Auto-Wipe
The cartridge jet plates are periodically wiped during printing. The default for this
function is Off.
To turn off the wiper
1
Choose Setup Menu/Paper Options/Auto-Wipe.
2
Press Select.
3
Use the up or down arrow button to display Off.
3
Press Select.
Defining user setup
You can save the options you use most frequently so you don't have to reconfigure the
printer each time you print an image. You can define up to eight different combinations
of options and save them with a user number ranging from 1-8. Select the user number
you want to use before sending an image to the printer. If your printer driver has host-
controlled settings, the user setup may be overridden. If possible, disable the driver
control settings.
You can save settings for the following options:
• Cut On or Off
• Media Standard • Color Mode
• Drying Time
To save user setup
1
Choose Setup Menu/User Setup/Save User.
2
Press Select.
3
Use the up or down arrow button to display the number corresponding to the
user setting you are saving.
4
Press Select.
• Auto-Wipe On or Off
• Units
ENCAD
®
T-200
TM
• Save Media On or Off
• Normal or Expanded Margins
• Quality Mode
Printer Options 2-14
Reference Guide
Advertisement
Table of Contents
