Nest time
Nesting Time is the amount of time the printer waits for the next plot to fill the current
nest.
The printer will begin printing whenever the printer has been idle for the specified time
interval. The time is reset whenever a print job is received.
➪ ➪ ➪ ➪ ➪
To define nesting time
1
From the main menu, choose Setup Menu/HP-GL/2 Options/Nest Time.
2
Press Select.
3
Use the up or down arrow button to display the desired nest time.
4
Press Select.
Ink limit
The printer can assign an ink limit to polygon fills and wide vectors. This helps prevent
bleeding when printing on inexpensive inkjet media. The default for this option is On.
If you are using high quality media, this option may not be needed and can be turned off.
➪ ➪ ➪ ➪ ➪
To enable the ink limit
1
From the main menu, choose Setup Menu /HP-GL/2 Options/Ink Limit.
2
Press Select.
3
Use the up or down arrow button to display ON.
4
Press Select.
NovaJet 800 Series Reference Guide
HP-GL/2 options 4-7