Table of Contents
Advertisement
HP-GL/2 Options
Palette
Control
Rotation
Ink reduct
Nest enable
Nest time
Reprints
Ink limit
User Setup
Sel user
Save user
Units
Language
Init settings
Print settings
Ink Options
C, M, Y, K preheat
Dry time
provides access to a further menu to select an AutoCAD color palette
or a generic HP-GL/2 palette.
determines whether certain printing parameters are set in the soft-
ware application or overridden on the printer's control panel.
provides access to a further menu to enable rotation and set the
rotation angle.
provides access to a further menu in which to set the percentage by
which to decrease the amount of ink emitted to help prevent bleeding
or pooling of ink. Options are 0, 12.5, 25, 37.5, and 50.
provides access to a further menu to turn nesting on or off.
provides access to a further menu to define the amount of time the
printer waits for the next plot to fill the current nest.
controls the number of copies that are printed.
limits the amount of ink that is used in polygon fills and wide vectors.
provides access to a further menu to select a previously saved user
configuration. Default = User 1.
provides access to a further menu to save the current printer configu-
ration to the selected user number. Default = User 1.
provides access to a further menu to choose the calibration units:
English (default) or Metric.
provides access to a further menu to select the language used for the
display. Choose from English (default), German, French, Italian,
Spanish, Portuguese, Japanese.
returns the printer to its default settings. All previously saved options
are erased.
prints the current printer settings.
provides access to a further menu in which you can set the ink
preheat value for each cartridge.
provides access to a further menu to select the dry time in the range
of 0 seconds (default) to 1 minute, adjustable in 5 sec. increments,
or 1 to 60 minutes adjustable in 1 minute increments.
ENCAD
T-200
Reference Guide
®
TM
Menu Tree B-4
Advertisement
Table of Contents
