Image (file)
resolution
300 dpi
300 dpi
600 dpi
600 dpi
Choosing paper options
Paper options let you define the following:
• Supply *
• Margins
• Auto-Cut
*Media feeding and loading are described in the Installation Sheet.
Media supply
This setting allows you to select your media supply options. The available options are
Sheet and Roll. Select Sheet if you intend to use cut sheet stock. Select Roll if you are
going to use roll paper on the roll feeder. When you load media, the printer automati-
cally detects its width. It also detects and indicates media out conditions.
To choose supply type
1
Choose Setup Menu/Paper Options/Supply=.
2
Press Select.
3
Use the up or down arrow button to display the desired supply type.
4
Press Select.
Printer dpi
setting
300 dpi
1 input pixel prints as 4
output pixels.
600 dpi
1 input pixel prints as 1
output pixel.
300 dpi
1 input pixel prints as 1
output pixel.
600 dpi
1 input pixel prints as 1
output pixel.
• Media Standard
• Auto Wipe
• Save Media
ENCAD
®
T-200
Effect on printed output
The printed image is the
same size as the
original.
The printed image is 1/4
the size of the original.
The printed image is four
times the size of the
original.
The printed image is the
same size as the
original.
TM
Reference Guide
Printer Options 2-6