Table of Contents
Advertisement
Media standard
When you create an image, you determine its size at the computer. It's important that
you know the size of the image and load the appropriate size media because the printer
automatically defines the print area based on the loaded media's width. Be sure that the
media you load is wide enough to accommodate the image. If extra length is required,
use roll media. If the media is smaller than the image, the image may be truncated.
Minimum media width is 8.5". Note that the printable area is different depending on
whether you are using roll media or cut sheets. The printable area also differs for cut
sheets depending on color or 4BLK mode. Printable areas are shown in the tables which
follow.
To choose the media standard
1
Choose Setup Menu/Paper Option/Media=.
2
Press Select.
3
Use the up or down arrow button to display the desired media standard.
4
Press Select.
ENCAD
®
T-200
TM
Reference Guide
Printer Options 2-7
Advertisement
Table of Contents
