Selecting The Resolution; Registering The Job Program - Kodak 3000DSV-E Operator's Manual

Selecting the Resolution

Registering the Job
Program
A-61371 September 2004
The resolution for scanning (printing) can be selected.
1. Press the Shift key and the Resolution key together. The current
resolution is displayed.
Resolution
2. Press the Resolution key while holding down the Shift key to set the
resolution.
Connection mode
PR mode
PC mode
The current setting can be set up to 3 program registration locations
(1J, 2J and 3J) for both the PR connection and the PC connection.
Once the Job Programs have been set, you can recall them as needed.
1. Press the Memory Input key in the Setting mode. 1J starts blinking.
To change the program registration location, press the 1 key. The
display is cycled in order of 1J to 2J to 3J to 1J.
Memory Input Key
2. Select the program registration location (1J, 2J or 3J), and press the
Memory Input key again.
The program registration is over when all LEDs on the control panel
light up and the normal display is resumed.
Resolution
400 dpi
600 dpi
200 dpi
300 dpi
400 dpi
600 dpi
800 dpi
10 1
Display
4H
6H
2H
3H
4H
6H
8H
3-17