Table of Contents
Advertisement
Reprints
You can print up to 99 copies of a specific vector file. When Reprint is set to 0, only one
image is printed.
➪ ➪ ➪ ➪ ➪
To make multiple prints
1
From the main menu, choose Setup Menu/HP-GL/2 Options/Reprints.
2
Press Select.
3
Use the up or down arrow button to display the desired number of reprints
(0 to 99).
4
Press Select.
Nesting
Nesting allows the user to save media by printing multiple plots along the horizontal
width of the media. This feature makes the most efficient use of consumables and
reduces the time required to print multiple plots.
When nesting is active, HP-GL/2 plots will be stored within the printer, accumulating in
a nest. Printing will only begin when a nest becomes full, when a nesting timeout
occurs, if printer memory is exhausted, or when a plot that is incompatible with the
current nest is received.
A nest is full when the printer determines that no further jobs can fit across the page.
Nest timeouts are governed by the Nest Time parameter, which is set via the printer's
front panel.
If the printer runs out of memory, the current nest will be printed immediately, so that
memory may be reclaimed for use by new plots.
An incompatible plot is either a non-HP-GL/2 plot or an HP-GL/2 plot which has
different job characteristics than the current nest, such as quality, dpi, or margins.
If any of the following plot parameters are different between one plot and the next, the
last plot will be incompatible with the current nest, causing the nest to begin printing
immediately.
NovaJet 800 Series Reference Guide
HP-GL/2 options 4-5
Advertisement
Table of Contents
