Table of Contents
Advertisement
Parameters which are monitored for Nest compatibility:
The following parameters will not affect nesting:
➪ ➪ ➪ ➪ ➪
To enable nesting
1
From the main menu, choose Setup Menu/HP-GL/2 Options/Nest Enable.
2
Press Select.
3
Use the up or down arrow button to display Nest On or Off.
4
Press Select.
• Print quality;
• Number of passes;
• Print direction;
• Speed;
• Color mode;
• DPI;
• Dry time;
• Margins;
• Wipe on/off; and
• Media Save.
• Ink limiting;
• Replots;
• If Auto Rotation is enabled, then the nesting algorithm is free to rotate
the plot if it determines that doing so will save media. Plots are sequen-
tially fitted across the page from right to left; and
• The HP-GL/2 EC command can be used to control cutting. If any plot in
a nest has the cutter enabled, the plotter will cut after the nest.
NovaJet 800 Series Reference Guide
HP-GL/2 options 4-6
Advertisement
Table of Contents
