Table of Contents
Advertisement
Printing
The way you print from your computer depends on the driver or RIP you have installed.
Your printer comes with the following drivers and one RIP:
•
ENCAD Windows driver for general use
•
Heidi Driver - for printing files created with AutoCAD 2000 and LT 2000
•
ADI Driver - for printing files created with versions of AutoCAD prior to 2000.
Printing a file
The Windows driver allows you to print from virtually any Windows-based application.
➪ ➪ ➪ ➪ ➪
To print a file using the Windows driver
1
Open the file from within an application.
2
Choose File/Print.
3
Select your printer.
4
Click Features.
5
From here, Page Setup and Advanced tabs allow you to adjust printer
specific options for your print file. Generally, you should only need to set
paper size and orientation options.
6
Click OK, then click OK again to send your file to the printer.
Heidi driver
Use the Heidi Driver to print files created with AutoCAD 2000, 2000i or LT 2000.
Details on the print options are included in the on-line help provided with the driver.
➪ ➪ ➪ ➪ ➪
To print from the Heidi driver:
1
Open the document from AutoCAD 2000, 2000i or LT 2000.
2
Choose File/Print.
3
Select your printer.
4
Change basic print options, such as number of copies and page range, as
needed. When a print option is available in your application's Print dialog
box, set it with your application.
5
Open the printer properties dialog box and change the driver print settings as
needed. For more information, refer to the on-line help.
3
Advertisement
Table of Contents
