Table of Contents
Advertisement
Preparing a fax for transmission
Printing a fax cover page
Loading originals
Changing resolution and brightness
Before you send a fax, prepare a cover page (if needed), load the original(s), and
change the resolution and brightness (if needed).
If you need a fax cover page, you can print one with your printer, then manually
complete the information (person to whom you are sending, fax number, your name,
etc).
To print a fax cover page:
1. Press Home .
2. Press
to select Fax Settings , then press OK .
3. Press
to select Print Fax Cover page , then press OK .
4. Load letter or A4 paper, then press Start Black or Start Color to begin printing.
To fax documents (up to 30 pages) on plain paper, load the original(s) in the
automatic document feeder (ADF).
To fax a photograph, documents on thick paper, or a document that is too small or
too large to fit in the ADF, place the original on the scanner glass. (The ADF accepts
originals from 6.9 x 9.8 in. / 175 x 249 mm to 8.5 x 14 in. / 216 x 356 mm.)
NOTE: You can fax only one page at a time from the scanner glass.
For more information on loading originals, see
Before sending your fax, change the resolution and brightness settings, as needed,
based on your original.
To modify settings before sending your fax:
1. Press and hold Fax .
2. With Send Fax selected, press OK .
3. With Fax Options selected, press OK .
4. Press
to select Resolution .
The resolution setting determines the amount of detail that is transmitted.
Select:
• Standard (default) for most documents
• Fine for documents with fine print
• Photo for photographs
5. Press
to select Brightness .
www.kodak.com/go/aiosupport
KODAK ESP Office 6100 Series All-in-One Printer
Loading originals, page
25.
49
Advertisement
Table of Contents
