Changing Resolution And Brightness - Kodak OFFICE HERO 6.1 Extended User Manual

Faxing

Changing resolution and brightness

96
Before sending your fax, change the resolution and brightness settings, as needed,
based on your original.
To modify settings before sending your fax:
1. Press Fax.
2. With Fax Options selected, press OK.
to select Resolution.
3. Press
The resolution setting determines the amount of detail that is transmitted.
Select:
• Standard (default) for most documents
• Fine for documents with fine print
• Photo for photographs
4. Press to select Brightness.
Adjust the brightness setting according to how light or dark your original is.
Select:
• Normal (default) for most documents
• +1 to +3 to lighten dark originals
• -1 to -3 to darken light originals
NOTE: If you do not want to save these settings for future faxes, send your fax. The
settings will apply only to the current transmission. If you want to save these
settings as defaults:
to select Save as Defaults, then press OK.
a. Press
b. Select Yes, then press OK.
www.kodak.com/go/aiosupport