Global Hdd Led1, 2 (1- -2); Power Capping Led - NEC Express5800/T110i-S User Manual

Chapter 1 General Description
4.5.3
Global HDD LED1, 2 (1-
Global HDD LED indicates the status of HDDs and optical disk drive.
Global HDD1, 2 LED pattern
Global HDD LED 1
On/blinking (green)
Off
Blinking (green)
Off
4.5.4

Power Capping LED

Power Capping LED indicates enabled/disabled status of Power Capping feature as shown below.
Power Capping LED pattern
On (green)
Blinking (green)
Off
28
-2)
Global HDD LED 2
Off All
On (amber) In case that RAID is constituted with
optional RAID controller or 2.5-inch
cage.
In case that 3.5-inch HDD cage and
using RAID controller.
Blinking (amber) In case that RAID is constituted with
optional RAID controller or 2.5-inch HDD
cage.
Off All
Power Capping feature is enabled.
Power Capping is enabled and power control (capping) is working.
Power Capping feature is disabled.
Note
Power Capping LED seems to be lit or blinking amber when STATUS LED is lit or
blinking amber. The amber STATUS LED indicates a hardware failure. Contact
your sales representative.
Express5800/T110i-S User's Guide
Configuration
Accessing to hard disk drive or
optical disk drive.
Hard disk drive is failing.
The LED may be lit few seconds
after power is turned on or reset,
and this is normal behavior.
Rebuilding is in progress
No access and No HDD fault
Description
4. Names and Functions of Parts
Description